Potential hazard of handlebar break while riding, resulting in loss of control and falls
Nitto Co., Ltd. (“NITTO”) announces that due to the incidents that Nitto
reported to date, Nitto decided to recall the subject model and to replace it with a free substitution model.
|The product may have a variety of colors, such as red, blue, gold and so forth.||The product has at the grip end carved seals that read “NITTO B259” and two alphabet letters.||The product has a center collar at the middle and a carved seal that reads “NITTO”|
-NOTICE- Those that have no center collar or “ferule” are either made of steel or
Please contact us with this form with this form.
Items marked * are mandatory.
INSTRUCTIONS FOR INSTALLING THE NITTO B260AA HANDLEBAR
1.First, please confirm the bar you are going to assemble is right one.
It has “B260AA” carved seal on center collar.
2.Insert the handlebar through the stem clamp.
3.Tighten the clamp fixing bolt slightly. If your stem uses more than one
clamp fixing bolt, tighten each slightly and evenly. Tighten just enough
to hold the bar in position.
4.Center the handlebar in the stem. Adjust the angle to your preference.
5.Tighten the fixing bolt. If your stem uses up to four bolts, tighten each bolt
slightly and evenly.
6.Confirm that the handlebar is secure and won’t rotate in the clamp.
7.Install the brake lever and tighten the lever clamp bolt. Install grips or
handlebar tape and enjoy your bike in a sensible manner.
Should you have any questions, please contact us below.
In case you want have your handlebar installed professionally, please ask
Nitto Co., Ltd.
Address: 3-23-7 Minamihatogaya, Kawaguchi, Saitama 334-0013
(toll free, Only available in Japan and in Japanese) between 9 a.m. and 5 p.m.
Monday through Friday